13
water and oil to wet it.
5. Carbon brush replacements
Carbon brushes are consumable
parts, when it becomes worn or "limit
worn" it can cause motor trouble, we use
auto-stop carbon brush, it stopped
automatically when carbon brush worn
out, at that time, replace a new couple of
them as following procedure:
1
Screw M4x10
2
Brush holder
3
Cap rubber
4
The cover of carbon bush holder
5
Carbon brush
When replace the carbon brush, just dismantle parts as order1,2,3…,
after that assembly in reverse order
Remark:
after carbon brush replacement, please make sure all of the screws are tightened
enough!
6. Cleaning
Clean the machine regularly with a soft cloth, preferably after each use. Solvent such as gasoline,
thinner, alcohol etc.. These kind of chemical materials are not allowed to use, water or soap are
recommended!
7. Warranty
For the condition of warranty, please refer to the separately provided warranty card.
Environment
Faulty and /or discarded electrical or electronic apparatus have to be collected
at the appropriate recycling location.
