XIMEA xiX-XL, Руководство пользователя

Страница: 50 / 111

Connecting digital output to a PNP-compatible device
Output state Output switch state Input state
ON Sinking current Not energized
OFF Relaxing Pull up (energized)
Figure 35: connecting digital output to a PNP-compatible device
Pull up resistor can be calculated as follows:
R =
V
PSU
−
V
input
I
input
,
where:
V
PSU
is power supply voltage. Must be higher than required input amplitude,
V input is required input amplitude,
I input is input driving current (corresponding to input amplitude).
Remember to use the appropriate resistor power rating:
P ( R ) > ( V
PSU
−
V
output
)
×
I
input
XIMEA Technical Manual, Version: v240108 43