Xilinx Kintex UltraScale FPGA KCU1250 Скачать руководство пользователя страница 37

Страница: 37 / 40

KCU1250 IBERT Getting Started Guide

UG1061 (v2017.4) December 20, 2017

www.xilinx.com

Appendix A

Warranty

THIS LIMITED WARRANTY applies solely to standard hardware development boards and

standard hardware programming cables manufactured by or on behalf of Xilinx

(“Development Systems”). Subject to the limitations herein, Xilinx warrants that

Development Systems, when delivered by Xilinx or its authorized distributor, for ninety (90)

days following the delivery date, will be free from defects in material and workmanship and

will substantially conform to Xilinx publicly available specifications for such products in

effect at the time of delivery. This limited warranty excludes: (i) engineering samples or beta

versions of Development Systems (which are provided “AS IS” without warranty); (ii) design

defects or errors known as “errata”; (iii) Development Systems procured through

unauthorized third parties; and (iv) Development Systems that have been subject to misuse,

mishandling, accident, alteration, neglect, unauthorized repair or installation. Furthermore,

this limited warranty shall not apply to the use of covered products in an application or

environment that is not within Xilinx specifications or in the event of any act, error, neglect

or default of Customer. For any breach by Xilinx of this limited warranty, the exclusive

remedy of Customer and the sole liability of Xilinx shall be, at the option of Xilinx, to replace

or repair the affected products, or to refund to Customer the price of the affected products.

The availability of replacement products is subject to product discontinuation policies at

Xilinx. Customer may not return product without first obtaining a customer return material

authorization (RMA) number from Xilinx.

THE WARRANTIES SET FORTH HEREIN ARE EXCLUSIVE. XILINX DISCLAIMS ALL OTHER

WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR NON-INFRINGEMENT, AND ANY WARRANTY THAT MAY ARISE FROM

COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. (2008.10)

Do not throw Xilinx products marked with the “crossed out wheeled bin” in the trash.

Directive 2002/96/EC on waste electrical and electronic equipment (WEEE) requires the

separate collection of WEEE. Your cooperation is essential in ensuring the proper

management of WEEE and the protection of the environment and human health from

potential effects arising from the presence of hazardous substances in WEEE. Return the

marked products to Xilinx for proper disposal. Further information and instructions for

free-of-charge return available at:

www.xilinx.com\ehs\weee.htm

Send Feedback

Содержание Kintex UltraScale FPGA KCU1250









































Результаты поиска

Содержание Kintex UltraScale FPGA KCU1250

Отзывы:

Похожие инструкции для Kintex UltraScale FPGA KCU1250

Бренды по названию

Популярные бренды

Xilinx Kintex UltraScale FPGA KCU1250, Руководство по началу работы

Результаты поиска

Содержание Kintex UltraScale FPGA KCU1250

Отзывы:

Похожие инструкции для Kintex UltraScale FPGA KCU1250

Бренды по названию

Популярные бренды