26
“○”：
It indicates that the parmneter setup value can be modified when the inverter is
in stop status and running status .
“
“
”：
” ：
It indicates that the parameter setup value cannot be modified when the inverter
is in the running status .
It indicates that the numerical value of the parameter is the actually measured
value or reserved parameter , which cannot be modified .
*
Chapter 5 Function Parameter Table
Chapter 5 Function Parameter Table
Function parameters grouping according to their function , they are from F0 to FD and FV ,
In order to easy to set function code, when you are using operation panel , function group
In order to protect parameter more dffectively , the inverter provides password protection for
In the
password protection status , you can change the user password at any time , it
unlock
If F6.08 is set to zero , you can cancel user password ; if F6.08 is set to non-zero , then the
parameter is protected by password when upon power .
takes the last input numerical value as the correct password .
function code . After setting user password ( It means F6.08 parameter is set to non-zero ) , when
user presses FUNC key and enter the function code edit status ,the system will enter the status to
confirm user password firstly, and then 0000 will be displayed and suggest that user inputs password .
“
”
You cannot modify parameter normally until user password is input correctly , or else even though you entered
the function code programming status, all function codes cannot be modified .
Description of the row content in function table :
number correspond to the level 1 menu , function code number correspond to the level 2 menu
and function code parameter correspond to level 3 menu .
First Row
Function Code
: It is function parameter group and parameter number .
“
”
Second Row
Name
: It is the whole name of function parameter .
“
”
Third Row
Setup range
: It is valid setting value of function parameter .
“
”
Forth Row
Minimum unit
: It is the minimum unit of setup value of function parameter .
“
”
Fifth Row
Factory default value
: It is original setting value of function parameter
“
”
when
it leaves factory.
Sixth Row
Modification
: It is modifiable property( means whether it is allowed to modify
“
”
and the modifiable condition) ,the description is as follows:
There are fifteen groups of my company inverter . Every function group contains some function codes ,
which adopt the mark
of function code group number add function code number . The other contents
way
of the manual appears word like FX.YZ , means
X group,
that the YZ number function code in
For example F6.08 means that the eighth function code in the sixth group.
