Updating the SC firmware will take up to 2 minutes. A successful SC firmware update will
result in a message similar to the one shown below. The SC firmware will be updated and no
cold boot is required.
Updating SC firmware on card[0000:65:00.0]
Stopping user function...
INFO: found 4 sections
.............................
INFO: Loading new firmware on SC
................
Successfully flashed Card[0000:65:00.0]
1 Card(s) flashed successfully.
The installation for deployment is now complete. You can refer to
for information on how to validate the installation.
Related Information
Generating the xbmgmt flash --update Command
Troubleshooting
Changing XRT and Target Platform Versions
Chapter 4: Installing the Deployment Software
UG1370 (v1.7) December 9, 2020
Alveo U50 Data Center Accelerator Card Installation Guide
24