2
4.
Hardware:
FRONT PANEL
Top - front panel of Neutrino A1616 model shown (older front panel version
shown below it)
1.
LCD Display
The LCD Display shows all of the necessary information to control the settings of the unit
from the front panel.
2.
Power Status LED
(new front panel version only)
3.
Network Status LED
(Data Status LED on older front panel version)
a.
When the processor has an Ethernet cable / network cable connected the Network
status LED on the front of the processor will light - once the processor initializes. If
there is no Ethernet / network cable attached it remains off.
Note:
When the Network status LED is on it does not mean that you have
established a Network Connection – only that an Ethernet or network cable is
connected to the processor. Proper Network Connection and Operation is
indicated/displayed only in the software’s “Network View” page (see the Network
View & Connection section of this guide).
b.
When the processor and software are connected and communicating the Network
status (Data status) light will flash.
4.
Input/Output Signal Indicators
Each Input and Output channel has a dual colour LED signal indicator. Green for signal
present at -40 dBu and Red at +17 dBu at the advent of analog clipping.
5.
Menu Buttons
There are 6 menu keys:
<<Menu
(Menu Down),
Menu>>
(Menu Up),
<<Cursor
(Cursor
Down),
Cursor>>
(Cursor Up),
Enter
and
Exit
. The functions of each key is explained below:
<<Menu:
Go to previous menu screen.
Menu>>:
Go to next menu screen.
<<Cursor:
Go to previous cursor in the menu screen.
Cursor>>:
Go to next cursor in the menu Screen.
Enter: Enter
enters the
System Menu
from the main menu and is used in the
System Menu
to proceed with selected actions.
Exit:
Exit to the
Main Menu
.
Содержание neutrino series
Страница 1: ...NEUTRINO Product Quick Start Guide...
