Xilica Audio Design neutrino series, Быстрый старт

Страница: 14 / 26

12
(b) Once you are in Project View /Design Mode working on a DSP design you are able to switch
back & forth between “ Project View ” and “ Network View ” by selecting the Network View
/ Project View button at the top right of the work page area. Once you do it will take you
to the Network View page and the button will re-name itself “Project View”. Selecting the
Project View button will take you back to the Project View page to continue working on
your DSP design project.
Component Libraries / Component Properties
The Component Libraries menu on the left side of the Project View/Design
Mode work area is where you will find all the processor, control device, and
DSP modules you will be selecting and working with - found under the
System Components & DSP Modules sub heading and the category
headings of Neutrino Processors , Control Devices and DSP Modules .
The Component Properties menu on the right side of the Project View
work area provides the means to alter the specific characteristics of DSP
Modules and to label items. Click on any module or wire to open up its
specific properties menu. Characteristics such as name, position,
appearance, I/O size (# of inputs and outputs), resource usage, link
information (source & destination labels) and more can be adjusted & labeled in this menu.
Processor Module
Neutrino is an open architecture DSP and you use the NeuConsole drag and drop software to
create your own specific DSP design layout for each project application.
(a)
From System Components in the Component Libraries on the left of the Project
View/Design Mode work area – click and drag the Neutrino A1608 processor module we
will use for our design example and drop it onto the Project View/Design Mode work area
as shown below.