20
(d)
Any problems – check Auto Warning Messages in Network View regarding any Firmware
Incompatibility with Software (will not load your design into device if any incompatibility).
When complete – as shown below,
(a)
Note
that the Design Mode label at the top of the page has changed to
“Online Mode”
and that the red “Switch to Online Mode” button is now Blue and has been re-named
“
Switch to Design Mode
”. Thus you are able to quickly switch back and forth between
Online Mode
and
Design Mode
.
(b)
Note
that the
Tool Bars
at the top of the
Online Mode
page, the opened DSP schematic
and the two opened DSP modules shown are now
Red
(not blue) indicating that the
hardware and software are in
Online Mode.
(c)
Note
that when the red processor module is visible as it is above that the processor device
model has a green indicator beside it to indicate that the processor device is connected, is
in Online Mode and active.
(d)
Note
that you can continue to make adjustments to the DSP modules in
Online Mode
.
When you do, upon switching back to
Design Mode
you will be asked
“do you want to
copy the Online Device parameter changes back to your project (file) –
yes or no”
.
So you can make parameter adjustment changes to the DSP modules in
Online Mode
, hear
their effect live, and not affect the related DSP design project file as saved on your PC if you
select
“
No
”
from that menu. Or select
Yes
to modify your saved project file and continue
working or
Yes
and
Save As
immediately to save the changed processor settings to a new
Содержание neutrino series
Страница 1: ...NEUTRINO Product Quick Start Guide...
