-9-
SAVE SETTINGS TO CARD:
Writes the contents of the
settings (alarms, tank capacity, etc) to the memory card.
READ SETTINGS FROM CARD:
Read a previously
recorded file on the card and write to the memory of
the unit. (
Picture 20
)
CAUTION: All settings on the memory will be replaced
by the contents of the file
.
SOFTWARE UPDATE
Procedure:
1)
Use the supplied memory card, or a microSD memory card formatted in FAT16 or FAT32. At
time of writing unit was tested with cards from 1 to 8Gb. ExtFAT (32 GB and over) not
supported.
2)
Unzip the provided file. Copy the FC1.bin file on the uSD card. Do not rename the file.
3)
Insert the card on the unit.
4)
Assure you have a healthy battery connected.
5)
Touch on TOOLS button, Software Update, Update button.
6)
WAIT! The procedure takes about 1 minute. Do not shutdown the unit while updating, the
software can become corrupted and the unit damaged.
7)
Once you again see the normal screen with Xicoy logo, check that it display the new version
number.
Disposal
Electrical equipment marked with the cancelled waste bin symbol must not be
discarded in the standard household waste; instead it must be taken to a suitable
specialist disposal system.
In the countries of the EU (European Union) electrical equipment must not be discarded
via the normal domestic refuse system (WEEE - Waste of Electrical and Electronic
Equipment,directive 2002/96/EG). You can take unwanted equipment to your nearest
local authority waste collection point or recycling centre. There the equipment will be
disposed of correctly and at no cost to you.
By returning your unwanted equipment you can make an important contribution to the
protection of the environment.
Picture 20
