-5-
The GPS module (
Picture 8
) has two LED lights. Green blinks while it
is looking for satellite data, and the blue blinks when the module
has acquired the position and is fully functional.
G-Meter
On the left side (
Picture 9
) the current measure of all 3
axis are displayed, and the gauge will record the
maximum achieved since power-up, so the maximum
airframe stress can be check after landing.
Airspeed
(Plus model only)
Airspeed measured by Pitot tube is displayed, as well as
maximum airspeed achieved since power up in km/h, mph
and knots. The maximum is set automatically to zero at
power-up, and can be set to zero manually by touching the
Reset button (
Picture 10
).
Engine data terminal
The half bottom of the screen (
Picture 11
) displays same
data similar to the normal data terminal, including the
buttons. The upper half of the screen displays the data in
real time in graphical form. RPM, EGT, Pump power and
fuel gauges.
SETUP screens
Touching the SETUP button (
Picture 12
) on main screen, the
different adjustment options will be displayed.
Picture 8
Picture 9
Picture 10
Picture 11
Picture 12
