-7-
Transmitted data to the TX may vary depending of the radio brand. Jeti allow all data
(engine data, G load, Airspeed, altitude, GPS coordinates, GPS speed, height), but other
radios don’t support some of the measures or are displayed using wrong units
(amperes in place of G load, for example).
Slots assignment
(MPX and Futaba radios only).
This screen (
Picture 16
) allows assignment of the
telemetry slot on MPX and Futaba radios so the
measures can be transmitted.
Alarms adjust (Picture 17)
(On radios that allow alarms through telemetry)
Remote alarms can be set on this screen for the radio
systems which need that alarms be programmed in
receiver side.
Data recording
If there is a memory card inserted, the Flight computer will record all the measured data once
each 0,5s on the card.
Data recorded in text form can be read using any text editor like Notepad, imported to Excel, or
viewed in 3D on Google Earth using the free FlightViewer software supplied by Xicoy.
A new file is created at each power-up. Files are numbered and if the system has the GPS
module installed and it is receiving data, the date and time of the file will be the current one.
An example of a file is:
Xicoy Flight Computer Ver. 0.3
Date, Time, Cycle, RPM, EGT, Pump,Throttle,EcuBat,RxBat,Fuel,BaroAlt,G, Airspeed,Longitude, Latitude, GPS Speed, GPS Height
06/06/15, 15:50:17, 2, 31900, 576, 21, 50, 8.1, 5.9, 100%, 64.36, 0.9, 113, 004º55.2480E, 44º10.8052N, 4, 97.7
06/06/15, 15:50:18, 2, 31900, 576, 21, 50, 8.1, 5.9, 100%, 64.27, 0.7, 113, 004º55.2475E, 44º10.8051N, 3, 97.8
06/06/15, 15:50:18, 2, 32000, 580, 21, 50, 8.1, 5.9, 100%, 64.20, 0.4, 113, 004º55.2470E, 44º10.8050N, 3, 97.8
06/06/15, 15:50:19, 2, 32000, 580, 21, 50, 8.1, 5.9, 100%, 64.21, 0.5, 113, 004º55.2466E, 44º10.8049N, 4, 97.9
06/06/15, 15:50:19, 2, 32000, 580, 21, 50, 8.1, 5.9, 100%, 64.18, 0.9, 113, 004º55.2460E, 44º10.8048N, 4, 97.8
06/06/15, 15:50:20, 2, 32000, 584, 21, 50, 8.1, 5.9, 100%, 64.24, 0.9, 113, 004º55.2456E, 44º10.8046N, 5, 97.7
Picture 16
Picture 17