-4-
Memory card
The slot for the memory card is located in bottom/right side (Picture 2).
Card should be of microSD type (Picture 3), maximum capacity 16Gb.
Formatted in FAT or FAT32, other formats are not accepted. Typically
the recording function uses 1MB/hour, so a 1 GB card can store 1.000
hours.
Operation
At power-up the main screen will be displayed
(Picture 4). There are currently 3 buttons.
Info. Access to information / measures
menus.
Setup. Access to setup screens
Tools: Special menus for advanced
functions, like software upgrade and
settings backup.
Info screens
After touching the Info button (Picture 5), a list of the different
measures will be offered.
The list displayed on your particular unit can be different
depending on the options installed and software version
.
Air Data
This screen (Picture 6) displays the current ambient conditions.
Temperature and pressure are measured by the internal
sensors. Altitude, air density and engine performance are
calculated from this data. Jet engines provide the nominal
thrust at 15ºC and sea level conditions. The expected engine
power at the current ambient conditions is automatically
calculated and displayed.
GPS
If the GPS module (
Picture 7
) is connected, this
screen displays the data in real time.
GPS module should be installed in the model with
the antenna on top (as per picture) and without any
metallic or carbon fiber cover.
Picture 3
Picture 4
Picture 5
Picture 6
Picture 7
