5.5.1.5 24 x 2.5" Drive Pass-Through Configurations
Drive Configurations
Table 5-26
Drive configurations
24 x 2.5" drive
pass-through
configuration
(3 x RAID
controller
cards)
● Front drive:
24 x 2.5"
– Slots 0
to 23
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
only
NVMe
drives
a
.
-
● SAS/SATA
drive: 3 x
PCIe plug-
in RAID
controller
cards
The PCIe
plug-in
RAID
controller
cards are
installed in
slot 2,3 or
6 by
default.
● NVMe
drive: CPU
pass-
through
● a: NVMe drives are supported when CPU 2 is configured. A single-CPU server
does not support NVMe drives.
● For details about the optional components, consult the local sales
representative or see "OS and Parts Compatibility" in the
.
Drive Numbering
NO TICE
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the
FusionServer 2288H V7 Server Maintenance and Service Guide
.
●
Drive numbering of the 24 x 2.5" drive pass-through configuration (3 x RAID
controller cards) in
FusionServer 2288H V7 Server
Technical White Paper
5 Hardware Description
Issue 02 (2023-05-25)
Copyright © xFusion Digital Technologies Co., Ltd.
58