Configuratio
n
Front Drive
Rear Drive
Built-in Drive
Drive
Management
Mode
12 x 3.5" drive
EXP
configuration
2
● Front drive:
12 x 3.5"
– Slots 0
to 11
support
only
SAS/
SATA
drives.
● I/O module
1: 2 x 2.5"
a
– Slots 40
to 41
support
only
SAS/
SATA
drives.
● I/O module
2: 2 x 3.5"
– Slots 42
to 43
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
SAS/
SATA/
NVMe
drives
b
.
● Built-in
drive: 4 x
3.5"
– Slots 36
to 39
support
only
SAS/
SATA
drives.
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
● a: I/O module 1 (2 x 2.5") is configured with rear 2 x 2.5" drives and a PCIe riser
module.
● b: NVMe drives are supported when CPU 2 is configured. A single-CPU server
does not support NVMe drives.
● For details about the optional components, consult the local sales
representative or see "OS and Parts Compatibility" in the
.
Drive numbering
NO TICE
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the
FusionServer 2288H V7 Server Maintenance and Service Guide
.
FusionServer 2288H V7 Server
Technical White Paper
5 Hardware Description
Issue 02 (2023-05-25)
Copyright © xFusion Digital Technologies Co., Ltd.
54