51
Problem
Probable Cause
Remedy
There may be too
many applications
open.
Try closing other applications
before printing.
Reduce resolution from
600 dpi to 300 dpi.
Install more RAM in the
computer.
The computer
CPU specification
may be incorrect.
Check that the computer meets
the minimum specification.
Printing is
too slow
The computer
parallel port may
not be set for high
speed
communications.
If your computer is equipped
with an ECP parallel port,
enable this mode of operation.
Refer to the
Enabling High
Speed Printer
Communications
section and
your computers user guide.
Computer may not
have enough
memory (RAM).
Install more RAM in your
computer.
Print Job is too
large
Reduce resolution from 600 dpi
to 300 dpi.
Irregular
faded
patches of
print
There is a paper
quality problem.
Use only paper that meets the
specifications required by the
printer.
Toner may be
unevenly
distributed.
Remove the toner cartridge and
shake it gently to evenly
distribute the toner. Then
reinstall the toner cartridge.
Background
scatter
The paper may be
too damp.
Try printing with a different
batch of paper. Do not open
packages of paper until
necessary so that the paper
does not absorb too much
moisture from the air.
Printing over
uneven surfaces.
If printing onto envelopes,
change your printing layout to
avoid printing over areas that
have overlapping seams on the
reverse side.
Содержание WorkCentre XL2120
