Xerox WorkCentre XL2120, Руководство пользователя

Страница: 32 / 65

23
Alternate Paper Tray
(XL2140df)
The Alternate Paper Tray can be used to feed multiple sheets of
standard paper, or it can be used to feed single sheets of special
or heavy papers such as note cards, transparencies, and labels.
The Alternate Paper Tray holds up to 50 sheets of 20 lb/ 80 gsm
paper ranging in size from 3.5
×
5.5" to 8.5
×
14"/ A6 to
216
×
356mm.
Load special stock as follows:
Predrilled paper:
holes toward the rear of the copier.
Letterhead paper: face down with the top toward the left.
Envelopes: flap side up and toward the rear, one at a time.
Labels: face down, one at a time.
Transparencies: removable stripe face up and toward the rear,
one at a time.
•
Use labels, transparencies, and envelopes specifically
designed for copiers (high temperatures).
1. Place the original face down and align it with the
Registration Guide on the Document Glass.
2. Lower the Alternate Paper Tray, located on the right side of
the copier.
3. Unfold the Paper Support Extension as shown.
4. Adjust the Paper Guides to the width of the copy paper.
5. Insert the copy paper all the way into the Alternate Paper
Tray until it stops (do not force).
•
50 sheets max.
Note: When loading envelopes, labels, or transparencies insert
one at a time.
6. Press the Paper Supply key to select the Alternate Paper
Tray.
7. Select other required features.
8. Press the Start button.