21
Software Installation
(continued)
Software installation procedure (Windows
environment)
Before installing any software, read carefully the
Terms and conditions of
the user license
displayed as the first page of the specified software install
procedure and make sure that the WorkCentre is connected to your
computer as per the installation instructions.
First install the drivers located in the
Installation CD
. Once you have
completed the installation of the
printer driver
and
scanner driver
, the
WorkCentre is fully functional, however, you may then choose to install the
Pagis Pro 2.0
and
MGI PhotoSuite
CDs. All Software can be installed
using the following instruction sets for your particular operating system.
Windows
95/Windows
98
Suggestion: Switch off your WorkCentre now, and repower it only after
completing software installation.
1. Start
Windows
on your computer.
2. If your WorkCentre is powered, Windows
will recognize the
WorkCentre as “new” and display the message
New Hardware
Found
.
3. Click
the
Cancel
button on the screen.
4. Insert the CD in the CD drive of your computer; the installation program
starts automatically. Click on Xerox WorkCentre Software; then follow
the instructions displayed on your computer screen, choosing the
drivers you wish to install.
5. After installing the required drivers, select Restart now to exit and
reboot your PC or select Back to return to the introductory screen.
When you quit the Installer program, you will be asked to restart
Windows
.
Windows
3.1/3.11
1. Start Windows
on your computer.
2. Insert the installation CD in your computer’s CD ROM drive.
3. Open
Main
in
Program Manager
.
4. If you want to install the
printer driver
, continue as follows:
Содержание WorkCentre Xi70c
Страница 1: ...Xi70c User Guide 701P99508 4 99...
