2.13
U s e r G u i d e
P R O G R A M M A B L E F E A T U R E S E T T I N G S
2
Setting 10
Use the following procedure to change the
preset Reduction/Enlargement default
setting. This feature allows you to set a
specific preset reduction or enlargement
between 50-200%.
Select the Toner Saver by using the
Copy
Quality
button
.
Press again and hold the
Copy Quality
button
for approximately 4 to 6 seconds.
•
The light next to Auto will light.
•
The lights within the WorkCentre
Diagram will flash.
Press the
10
button until the number 10 is
displayed.
Press
Start
. The current reduction/
enlargement setting will flash.
1
2
3
4
Xe88qrg.bk Page 13 Thursday, February 17, 2000 4:25 PM
