2.11
U s e r G u i d e
P R O G R A M M A B L E F E A T U R E S E T T I N G S
2
Programmable Feature Settings
Settings 0 - 7, 14 and 15
To change the programmable features in the
chart on the following pages, follow the steps
below.
Select the
Toner Saver
.
Press again and hold the
Copy Quality
button
for approximately 4 to 6 seconds.
•
The light next to Auto will light.
•
The lights within the WorkCentre
Diagram will flash.
From the Programmable Features Chart on
page 2.11, select the Program Number of the
feature to be changed. Enter the selection
using the
10
button.
Auto
Toner Saver
Photo
Text
1
2
Copy Quality
Copy Contrast
On-Line/
Off-Line
Clear
Ready
Reduce/Enlargement
Indicators
3
Xe88qrg.bk Page 11 Thursday, February 17, 2000 4:25 PM
