![background image](http://html1.mh-extra.com/html/xerox/workcentre-pro-385/workcentre-pro-385_user-manual_4288362297.webp)
8-6
Maintenance
Automatic Document Feeder Rubber Pad
Replacement
1
Open the Control Panel Cover.
2
Insert a small flat blade screwdriver under the right and left sides of the
ADF Holder.
3
Apply upward pressure to release the two locking tabs on each side of
the assembly.
4
Remove the assembly and replace the ADF Rubber.
5
Reassemble the components in the order shown in the diagram above.
6
Place the assembly back onto the ADF Holder.
7
Press down on the assembly until it locks into position.
8
Close the Control Panel.
ADF Holder
ADF Sheet
ADF Rubber
Содержание WorkCentre Pro 385
Страница 32: ...1 28 Getting Started 5 Select a language A window will appear showing the components to be installed...
Страница 262: ...7 4 Troubleshooting 4 Adjust the paper guides to match the width of the paper...
Страница 269: ...7 4 Troubleshooting 4 Adjust the paper guides to match the width of the paper...
Страница 274: ...7 4 Troubleshooting 4 Adjust the paper guides to match the width of the paper...