Xerox WorkCentre PE120i, Руководство системного администратора

Страница: 79 / 131

Xerox WorkCentre PE120i System Administration Guide Page 6-13
Ne
twor
k
Ins
tal
la
tio
n
Us
in
g In
ter
net
Se
rv
ic
es
¾
Enter the [NDS Tree] and [NDS Context] if using NDS.
¾
Enable the [Service Advertising Protocol (SAP)] .
¾
Enter the [Primary File Server] name, if using Bindery.
¾
Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
¾
Select the [Status] tab and then select [Reset Network Controller] to enable the
selections to take effect.
¾
Continue with Test Print.
Test Print
To ensure the device has been installed on the network correctly a test print should be
submitted from a client workstation. Perform the following steps:
¾
Open a document on a client workstation.
¾
Select the device as the printer to which the selected document will be sent.
¾
Print the document on the device and verify that it prints correctly.
¾
Ensure the driver is installed on every workstation that will be sending jobs to the device.
¾
Repeat the test for all workstations that will be sending jobs to the device.
¾
The installation process is now complete.
6
7
8
9
10
11
1
2
3
4
5
6