Xerox WorkCentre PE120i, Руководство системного администратора

Страница: 31 / 131

Xerox WorkCentre PE120i System Administration Guide Page 2-7
B
a
sic
N
e
tw
o
rk I
n
st
al
la
ti
on
Manually setting TCP/IP Addresses
At the WorkCentre PE120i , perform these steps:
HINT: Xerox CentreWare Internet Services can also be used to configure the
WorkCentre PE120i, refer to the Internet Services chapter for instructions.
When manually making the TCP/IP settings, you will need to know the following information:
¾
The IP address.
¾
The subnet mask, if required.
¾
The Gateway address, if required
1
¾
Press [Menu] until you see
Network Setup on the top line of
the display.
8. Network Setup
[Reset Network]
2
¾
Press or until Configure
Network is displayed and press
[Enter].
8. Network Setup
[Config Network]
3 3
¾
Press or until TCP/IP is
displayed and press [Enter].
Config Network
[TCP/IP]