WorkCentre 7655/7665 Tab Creation Supplement
Page 21 of 22
8. The Precut Tab Setup window will appear. This window
enables you to select the Number in Sequence (the
number of tabs in each tab set) and the Tab Margin
Shift (the amount of shift applied to your tab master
image when printed on the tab). You can shift the image
from 0 to 50 mm (0 to 2 inches) as required.
• Select 0.5 inches if you used the 8.5x11 inch template.
• Select 12.7 mm if you used the A4 template .
• Select Custom if you created your own tab master.
9. Select
OK to accept the Margin Shift setting.
10. Select OK.
11. The selections for the tab pages will be displayed.
Review the settings to verify they are correct.
