WorkCentre 7655/7665 Tab Creation Supplement
Page 11 of 22
Place the first tab divider face down on the document glass
aligned to the rear right hand corner and close the Document
Handler.
11. Select the tray that contains the tab stock.
12. Select 1 - 1 sided copies.
13. Press Start. The divider will be scanned.
14. Repeat this process until all the segments of the
document have been scanned. Don’t forget to make the
appropriate selections for each segment. If you make a
mistake, select the Build Job Controls button and select
Delete the Last Segment. Scan the segment again.
15. When all the segments have been scanned, select Build
Job Controls.