![background image](http://html2.mh-extra.com/html/xerox/versant-80-press/versant-80-press_customer-expectation-and-installation-manual_3327730024.webp)
Detailed Specifications
Xerox
®
Versant® 80 Press
Customer Expectation and Installation Guide
Xerox Confidential
19
Bi-Fold Capability
Paper type and weight
Bi-Fold (Single Fold) **Capability by weight, size and paper finish
A4 / 8.5 x 11 in
B4/8.5 x 14 in
A3/11 x 17 in
12 x 18 in
SRA3
Uncoated 52-350
gsm
1
1
1
1 1
Coated 106-350
gsm 1
1
1
1 1
Fold Accuracy of Bi-Fold
(Lead and Side Edges)
•
Fold accuracy (lead and side edge):
≤
2.5 mm
Bi-Fold: 1 sheet/set, 64-300 gsm uncoated stock, 106-300 gsm coated stock
Booklet Marker Finisher
Limitations
•
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stacker Tray.
•
Higher jam rates may occur when running 280 gsm and above, tabloid sheets to the Booklet Maker.
•
After cancelling a job sent to the Booklet Maker, empty the purge tray before submitting another print job. This will
ensure that purged sheets are not inadvertently inserted into the next booklet printed.
C/Z Folder
The C/Z Folder is available with these finishing devices:
Standard Finisher
Booklet Maker Finisher
Standard Finisher Plus
The C/Z Folder unit produces Tri-C fold, Z-fold, and Z-Fold half-sheet.
The C/
Z folding tray accommodates 30 sheets of up to 24 lb. (64-90 gsm) uncoated media
Supported Paper size is 8.5 x 11 in (A4) to the bottom tray; 11 x 17 in (B4 and A3) to the top tray
Fold types, accuracy, and supported paper sizes
are shown in the following table:
Z-Fold Half-Sheet Also known as:
Engineering Z-Fold
Accordion Fold
Accordion Fold
-out
Produces folded output ½ size of original:
B4 -> B5
A3 -> A4
11 x 17 in -> 8½ x 11 in
C-Fold Also known as:
Letter Fold
Tri-fold
Envelope Fold
Produces folded output 1/3 size of original.
For stock sizes:
A4**
8½ x 11 in **
** Delivered to Envelope Folder
Z-Fold Also known as:
Accordion Fold
Concordia Fold
Produces folded output 1/3 size of original.
For stock sizes:
A4**
8½ x 11 in **
** Delivered to Envelope Folder Tray
SquareFold Trimmer Module
The SquareFold Trimmer is an optional finishing device that flattens the spine of a booklet and performs face trim of the booklet.
IMPORTANT:
It is available with the Booklet Maker Finisher; it is not available with any other finishing device.
For information related to the SquareFold Trimmer Module, refer to Module Dimensions for Optional Devices and Electrical Requirements for Optional Devices.
SquareFold Trimmer Specifications
Feature
Specification (with centerline paper)
Paper Types and Weights
52-350 gsm, Coated and Uncoated (18 lb. Bond - 110 lb. Cover)
Paper Size
Minimum: 8.5 x 11 in SEF (216 mm x 279 mm)
Maximum: 13 x 18 in SEF (330 mm x 457 mm)
Trim Capacity
520 sheets (90 gsm/24 lb.)
525 sheets (80 gsm/20 lb.)
Trim Dimensions
2 mm-20 mm, adjustable in 0.1 mm increments
Configuration
This equipment is located after the Booklet Maker Finisher, and the operation is as follows:
Receives the booklet from the booklet maker unit
Transports the received booklet to the square-fold unit to flatten the spine of the booklet and then to the trimmer
unit to trim the face of the booklet
Deposits the finished booklet into the booklet tray.
The SquareFold Trimmer Module is also able to face-trim without square-folding. All output from the Booklet Maker Finisher
can be passed through, square-folded, trimmed, or both squared-folded and trimmed, including custom sizes from 210 x
297.4 mm-330.2 x 457.2 mm (SEF Letter through 13 x 18 in).
Auto Recognition of the
SquareFold Trimmer Module
When the SquareFold Trimmer Module is docked to the Booklet Maker Finisher via cable, the finisher automatically
recognizes that the SquareFold Trimmer is installed.