Detailed Specifications
Xerox
®
Versant® 80 Press
Customer Expectation and Installation Guide
Xerox Confidential
13
Correct paper not loaded in the printer: If you print a job and the
correct paper is not loaded in the printer, the load paper message may not
specify the paper weight you need to load to complete your job. The
paper weights are listed in the Customer Release Notes and the paper
needed is displayed in the EFI Command Workstation Information
panel.
If you print an APPE job with many spot colors and select Composite
Overprint, your job may not print correctly.
Fiery Impose
Saving APPE jobs in Fiery Impose: When you have imposed a job in Fiery
Impose with APPE (Adobe PDF Print Engine) selected in Print Server Job
Properties, and saved the job, you cannot go back and make further
imposition changes to the imposed job. The default for saving APPE
imposed jobs is as a flattened PDF, which does not allow further changes.
If you are not satisfied with the imposition choices you have made, start
over with the original job.
NOTE:
If you save the job in .dbp format, you can make further
imposition changes, but the job will be RIPped as a PostScript job,
not as an APPE job.
Applications
If you print a job from Microsoft Word with the page size set to A4
and the EX-i/EX Print Server displays a message indicating that you
must load 8.5x11 paper, you must do one of the following:
- Reprint the job from Microsoft Word and set the paper size to
A4 on the Fiery Printing tab of the printer driver.
or
- Set the paper size for the job to A4 in Command WorkStation Job
Properties and reprint the job.
In general, if print options that are selectable from an application are
similar to print options that are specific to the EX-i/EX Print Server and
the digital press (on the Fiery Printing tab), use the print options that
are specific to the EX-i/EX Print Server and the digital press.
The EX-i/EX Print Server does not support printing from Adobe
FreeHand.
If you print a job to the EX-i/EX Print Server from Adobe InDesign
after setting the number of copies and selecting the media in the
printer driver, the settings might not be applied to the job. If this
happens, edit the Job Properties in Command WorkStation and
reprint the job.
Internet Explorer 8 and 9; when you display Help files for the EX-i/EX
Print Server utilities, all steps start with the number 1. To view Help
files correctly, use another browser or an earlier version of Internet
Explorer.
Responsibility Matrix
Action
Customer
Carrier
Xerox
Ensure adequate space and power to
configure the EX-i/EX Print Server to the
print engine.
X
Unpack system / components
X
3
Install server hardware
X
3
Connect all System Components prior
to powering up the system
X
3
Install the printer description files,
utilities, and printer drivers on client PCs
X
2
Ensure network configuration
X
2
Confirm network integrity
X
Acquire and install client workstation
network hardware and software
X
2
Monitor and Adjust calibration for color
matching of color management
systems
X
Action
Customer
Carrier
Xerox
Load any additional fonts
X
Procure BNC transceiver for network
connection (if required)
X
Set up and administer client workstations
X
Provide Helpline Support (when FSMA
is purchased)
X
1
Provide spared parts (when FSMA is
purchased)
X
1
Provide service (when FSMA is
purchased)
X
1
Install all software options designated
as customer installable
X
Secure all system software
X
Assess site security requirements and
configure the print server as needed to
satisfy customers IT/Security
department
X
Ensure all sensitive customer data is
removed from the server and print
engine hard drive before return to Xerox
X
1
Field Service Maintenance Agreement (FSMA) is required for these
services, for more information, contact your Xerox representative.
2
A customer can purchase professional consulting hours to have a systems
analyst assist in planning and implementing these activities.
3
The Xerox Versant® 80 Press is delivered and installed by Carriers. The
carrier unpacks, installs the hardware, connects the print server to the press,
and prints a job from the sample jobs folder. The customer installs all
software options.
Feeding Specifications
Bypass Tray
Capacity
250 sheet capacity (using Centerline Paper)
Sizes
Min: 3.9 x 5.8 in (100 x 148) SEF
Max: 13 x 19.2 in (SRA3) SEF
Weights
52 to 300 gsm uncoated, 64 to 300 gsm coated
Supported
Media Types
Plain, uncoated, coated, transparencies, heavyweight,
lightweight, predrilled, tabs, envelopes, hole punched,
labels, letterhead
Trays 1 -3
Capacity
550 sheets (per tray); combined capacity of 1,650
sheets (using Centerline Paper)
Sizes
Min: 5.5 x 7.2 in (140 x 182 mm)
Max: 13 x 19.2 in(330 x 488 mm)
Weights
64 to 256
Note: Jam rates may be higher with coated stocks when
feeding from trays 1-3.
Supported
Media Types
Plain, uncoated, coated, transparencies, heavyweight,
predrilled, tabs, hole punched, labels, letterhead
High Capacity Feeder (letter) (HCF)
Capacity
2,000 sheets (using Centerline Paper)
Sizes
8.5 x 11 in (A4) LEF
Weights
64 to 220 gsm
Supported
Media Types
Plain, uncoated, coated, transparencies, heavyweight,
predrilled, hole punched, labels, letterhead
