Xerox Versant 4100 Press Скачать руководство пользователя

Страница: 53 / 430

• Paper that is folded or wrinkled

• Paper that is curled more than 0.47 in., 12 mm

• Paper with cutouts or perforations

• Stapled paper

• Damp paper

• Thermal or heat-transfer paper

• Envelopes with windows, metal clasps, side seams, or adhesives with release strips

• Padded envelopes

• Envelopes

Note:

For envelopes, use Trays 5, 6, or 7.

Note:

In addition to the above list, there may be other media that is not recommended or

supported. For details, please contact your local Xerox representative.

PPaappeerr aanndd M

Meeddiiaa SSttoorraaggee G

Guuiiddeelliinneess

Storing paper and other media properly contributes to optimum print quality.

• Store paper in dark, cool, relatively dry locations. Most paper is susceptible to damage from

ultraviolet and visible light. Ultraviolet light, from the sun and fluorescent bulbs, is particularly
damaging to paper.

• Reduce the exposure of paper to strong lights for long periods of time.

• Maintain constant temperatures and relative humidity.

• Avoid storing paper in locations that are damp or collect moisture.

• Store paper flat on pallets, cartons, shelves, or in cabinets.

• Avoid food or drinks in the area where paper is stored or handled.

• Do not open sealed packages of paper until you are ready to load the paper into the trays. Leave

stored paper in the original packaging. The paper wrapper protects the paper from moisture loss
or gain.

• Some special media is packaged inside resealable plastic bags. Store the media inside the bag

until you are ready to use it. Keep unused media in the bag and reseal it for protection.

Xerox

Versant

4100 Press

User Documentation

Working With

Содержание Versant 4100 Press















































































































































































































































































































































































































































Результаты поиска

Содержание Versant 4100 Press

Отзывы:

Похожие инструкции для Versant 4100 Press

Бренды по названию

Популярные бренды

Xerox Versant 4100 Press, Пользовательская документация

Результаты поиска

Содержание Versant 4100 Press

Отзывы:

Похожие инструкции для Versant 4100 Press

Бренды по названию

Популярные бренды