Xerox Versant 4100 Press Скачать руководство пользователя

Страница: 358 / 430

• The press stops running and a fault message displays on the press touch screen.

• The message includes a graphical illustration showing the location of the fault along with a brief

explanation of corrective actions for clearing the fault.

• Paper jams may occur in multiple areas of the press and any optional devices connected to the

press. When this happens, the graphical illustration changes to show the multiple locations and
the required corrective actions.

• Additionally, if a fault occurs with an optional device, an indicator lights on that device control

panel and shows the corresponding area on the device where the fault occurred.

Always refer to the following information when clearing paper jams:

• Do not power off the press when removing paper jams.

• Paper jams can be removed with the press still powered on. When the power is turned off, all

information stored to the system memory will be erased.

• Clear all paper jams before resuming print jobs.

• Do not touch components inside the press. This can cause print defects.

• Ensure that all paper jams, including any small ripped pieces of paper, are cleared before

proceeding with print jobs.

• Gently remove the paper taking care not to tear it. If paper is torn, be sure to remove all torn

pieces.

• After removing paper jams, close all doors and covers. The press cannot print when doors or covers

are open.

• After clearing a paper jam, printing automatically resumes from the state before the paper jam

occurred.

• If all paper jams are not cleared, an error message continues to display on the press touch screen.

To clear any remaining jams, refer to the press touch screen for instructions and information.

Clearing Paper Jams from Inserter E1 Area

1. Open the T1 cover (1), then remove the jammed papers (2) as well as all of the paper loaded in

the tray (3).

Note:

When two or more sheets of paper are loaded, remove all sheets.

Fan the paper you removed and make sure all four corners are aligned correctly.

358

Xerox

Versant

4100 Press

User Documentation

Troubleshooting

Содержание Versant 4100 Press















































































































































































































































































































































































































































Результаты поиска

Содержание Versant 4100 Press

Отзывы:

Похожие инструкции для Versant 4100 Press

Бренды по названию

Популярные бренды

Xerox Versant 4100 Press, Пользовательская документация

Результаты поиска

Содержание Versant 4100 Press

Отзывы:

Похожие инструкции для Versant 4100 Press

Бренды по названию

Популярные бренды