Xerox Versant 4100 Press Скачать руководство пользователя

Страница: 389 / 430

• Additionally, if a fault occurs with the C/Z Folder, an indicator lights on the PR Finisher control

panel and shows the corresponding area on the C/Z Folder where the fault occurred.

Always refer to the following information when clearing paper jams:

• Do not power off the press when removing paper jams.

• Paper jams can be removed with the press still powered on. When the power is turned off, all

information stored to the system memory is erased.

• Clear all paper jams before resuming print jobs.

• Do not touch components inside the press. This can cause print defects.

• Ensure that all paper jams, including any small ripped pieces of paper, are cleared before

proceeding with print jobs.

• Gently remove the paper taking care not to tear it. If paper is torn, be sure to remove all torn

pieces.

• After removing paper jams, close all doors and covers. The press cannot print when doors or covers

are open.

• After clearing a paper jam, printing automatically resumes from the state before the paper jam

occurred.

• If all paper jams are not cleared, an error message continues to display on the press touch screen.

To clear any remaining jams, refer to the press touch screen for instructions and information.

Clearing Paper Jams from Folder Area E10

1. Open the folder front cover.

Xerox

Versant

4100 Press

User Documentation

389

Troubleshooting

Содержание Versant 4100 Press















































































































































































































































































































































































































































Результаты поиска

Содержание Versant 4100 Press

Отзывы:

Похожие инструкции для Versant 4100 Press

Бренды по названию

Популярные бренды

Xerox Versant 4100 Press, Пользовательская документация

Результаты поиска

Содержание Versant 4100 Press

Отзывы:

Похожие инструкции для Versant 4100 Press

Бренды по названию

Популярные бренды