manualshive.com logo in svg

Xerox VersaLink B7025, Руководство по обслуживанию

Xerox VersaLink B7025 - Продукт с функцией безопасности. Для получения дополнительной информации о безопасности скачайте бесплатно Руководство по дополнительным функциям безопасности с нашего сайта. manualshive.com - ваша источник информации для руководств.

Поделиться
Скачать
background image

April 2017

6-5

Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer

GP 4

General Procedures and Information

Launch Issue

GP 4 Machine Software

Purpose

To provide machine software information and explain the software loading procedures.

Obtaining Machine Software

The firmware download manager tool (FWDLMgr.exe) and the device firmware file (.bin) can 
be downloaded from the Xerox.com, Product Support & Drivers page.

Procedure

Four methods are available to download the machine software:

1.

Software Loading via the Special Boot Menu

2.

Software Loading via the Embedded Web Server

3.

Software Download via the USB Port

4.

Software Download via the Network Port (Port 9100)

Software Loading via the Special Boot Menu

NOTE: A video of this procedure is available on the EDOC. The video is accessible from the 
Library menu on the Service Interface.

1.

Download the firmware (.bin) file, refer to 

Obtaining Machine Software

.

2.

Create a folder named ‘DWLD’ on the USB memory device.

3.

Store the software download file (.bin) in the ‘DWLD’ folder

4.

Switch off the machine, 

GP 10

. Insert the USB memory device.

5.

Enter special boot mode, 

GP 22

. Select Download Mode on SPECIAL BOOT MENU 1/3, 

then touch YES. The UI will display SW update progress. The machine will eventually 
reboot.

CAUTION

Do not switch off the printer until the reboot is complete. The printer will reboot after the down-
load is complete.

6.

After the reboot, a Software Upgrade Report will print. Remove the USB memory device.

Software Loading via the Embedded Web Server

There are three options available for updating the software via the Embedded Web Page:

•

Check Now

•

Periodic Updates

•

Updates with File Specified

Check Now

Use this feature to check for software updates. 

Perform the steps that follow:

1.

Log in as an administrator via the Embedded Web Server. Ensure that software Update is 
set to Enable (Home/System/Software Update/Enable).

2.

Touch Check Now.

Periodic Updates

Use this feature setup the device to check periodically (daily, weekly, monthly) for software 
updates. 

Perform the steps that follow:

1.

Log in as an administrator via the Embedded Web Server. Ensure that software Update is 
set to Enable (Home/System/Software Update/Enable).

2.

Under the Check Automatically banner, use to pull down menu to set “When should the 
Device check for updates?” to Never, Daily, Weekly or Monthly.

Updates with File Specified

Perform the steps that follow:

1.

Download the firmware (.bin) file, refer to 

Obtaining Machine Software

.

2.

Log in as an administrator via the Embedded Web Server. Ensure that software Update is 
set to Enable (Home/System/Software Update/Enable).

3.

Under the Update with File Specified banner, touch Select.

4.

Browse to where the firmware file (.bin) is located. Select the (.bin) file, then touch Install 
Now.

Software Download via the USB Port

Perform the steps that follow:

1.

Download the appropriate firmware download manager tool (FWDLMgr.exe) and firm-
ware (.bin) to an appropriate file location on the PWS. Refer to 

Obtaining Machine Soft-

ware

.

2.

Connect a USB cable (type A/B) from the PWS to the machine.

3.

Double click on FWDLMgr.exe to run the firmware download manager tool.

4.

Touch Agree on the Firmware Update Tool (License).

5.

The Printer Model And File Selection window will open. From the pull down menu, select 
the printer model, then browse to where the firmware file (.bin) is located. Double-click the 
(.bin) file then select Add, then select Next.

6.

The Communication Interface Selection window will open. Select USB Port, then select -
Next.

7.

The software update status appears on the Update in Progress screen.

CAUTION

Do not switch off the machine until the reboot is complete. The machine will reboot after the 
download is complete.

8.

When the update is complete, the Result window will open. Touch complete. The 
machine will reboot, and a Software Upgrade Report will be printed.

Software Download via the Network Port (Port 9100)

Perform the steps that follow:

1.

Download the appropriate firmware download manager tool (FWDLMgr.exe) and firm-
ware (.bin) to an appropriate file location on the PWS. Refer to 

Obtaining Machine Soft-

ware

.

2.

Switch off the machine, 

GP 10

.

Содержание VersaLink B7025






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VersaLink B7025

Xyron FPO User Manual preview
FPO
Бренд: Xyron Страницы: 6
Xerox 7700 Setup Manual preview
7700
Бренд: Xerox Страницы: 2
Xerox 7700 Setup And Quick Reference Manual preview
7700
Бренд: Xerox Страницы: 40
Xerox 7700 Advanced Features And Troubleshooting Manual preview
7700
Бренд: Xerox Страницы: 69
Xerox 7700 Install Manual preview
7700
Бренд: Xerox Страницы: 42
Xerox 5700 Series Manual preview
5700 Series
Бренд: Xerox Страницы: 25
CAB A2+ Operating Instructions Manual preview
A2+
Бренд: CAB Страницы: 40
Oki 86 Specifications preview
86
Бренд: Oki Страницы: 4
TASKalfa 306ci First Steps preview
306ci
Бренд: TASKalfa Страницы: 36
Kodak 8437477 - EasyShare ESP 9 All-In-One Printer User Manual preview
8437477 - EasyShare ESP 9 All-In-One Printer
Бренд: Kodak Страницы: 143
Oki MICROLINE ML310 Handbook preview
MICROLINE ML310
Бренд: Oki Страницы: 32
Oki B700 Series Installation Instructions preview
B700 Series
Бренд: Oki Страницы: 4
Wasp WPL206 Series User Manual preview
WPL206 Series
Бренд: Wasp Страницы: 46
Oki ML490 Series User Manual preview
ML490 Series
Бренд: Oki Страницы: 94
Epson All in One Printer User Manual preview
All in One Printer
Бренд: Epson Страницы: 210
Epson aculaser cx37 series User Manual preview
aculaser cx37 series
Бренд: Epson Страницы: 261
Epson AL-MX200 Series User Manual preview
AL-MX200 Series
Бренд: Epson Страницы: 410
Epson AcuLaser CX29DNF User Manual preview
AcuLaser CX29DNF
Бренд: Epson Страницы: 456

Бренды по названию

Популярные бренды

Загрузить еще бренды