XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction
19
Quick Start for Printing to the X2-TECH (continued)
Color Printing with the HP-GL/2 Driver
1. From the Print command of your application, access the driver’s four-
tabbed (Paper, Job, Graphics, Monochrome) Document Properties
Dialog as follows:
In Windows 95/98/NT 4.0
Select “File,” “Print,” within a desktop application (such as Microsoft
Word) to display the Print Screen which lets you select your printer, the
number of copies to be printed, and the range of pages to be printed.
From your application’s Print Screen, click the appropriate button
(
Properties
in Microsoft Word, for example) to display the four-tabbed,
Document Properties dialog.
In Windows 2000
Select “File,” “Print,” within a desktop application (such as Microsoft
Word, for example) to display the Print screen which lets you select your
print driver and set numerous print processing parameters.
Select the Layout Tab or the Paper/Quality Tab, then click
Advanced
to
display the four-tabbed, Document Properties dialog.
In Autocad 2000I
Select "File," and "Plot" (or Page Setup) to display the Plot Screen.
Select this driver from the drop-down list of plotters. Wait a moment for
the driver's Document Properties Dialog to load. Click the
Properties…
button, select the Device and Document Settings Tab, choose "Custom
Properties," and click the
Custom Properties…
button. The four-
tabbed, Document Properties dialog will now be displayed.
2. From
the
Media type
drop-down menu of the Paper Tab, select one of
the media types supported by the X2-TECH printer. These include:
Presentation Bond – 360 DPI
Presentation Bond – 720 DPI
White Matte Film – 360 DPI
Backlit Film – 360/720 DPI
Poly Cloth – 360 DPI
Poly Canvas – 360 DPI
Photo Quality 360 DPI
Reinforced – 360 DPI
PSV – 360 DPI
Production – 360 DPI
90 Gram GA Paper – 360 DPI
3. From the four tabs of the Document Properties Dialog, make any other
selections deemed appropriate. Note that “Manual Feed,” for inserting a
cut sheet of media, and “Finishing,” for folding printed media, are not
supported by the X2-TECH printer.
4. Click
OK
to save all settings and close the Document Properties dialog.
5. Click
OK
on the application’s print screen to print your job.