Xerox Phaser EX7750, Руководство по установке программного обеспечения

Страница: 17 / 92

1
1-1 Setting up PostScript or PCL printing with Windows 2000/XP
This chapter describes the procedures for installing software and setting up printing
from a computer using a supported version of Windows. For the Windows versions
supported, see the
Quick Start Guide .
The general steps for installing the software are as follows:
• Install the PostScript printer driver or PCL printer driver and corresponding printer
driver files and set up the printer driver to communicate with the EX7750.
• Install Fiery utilities and user software.
• Configure the connection for Fiery utilities and user software.
• Install Adobe Acrobat and PitStop software from the Fiery DocBuilder Pro CD on
the designated Windows computer(s).
• Copy additional files from the User Software CD as required.
If you have other Fiery printer drivers already installed on your computer, use the Fiery
Printer Delete Utility to remove them. For details, see
“Installing Fiery utilities” on
page 1-19 and “To use Fiery Printer Delete Utility” on page 1-23.
Setting up PostScript or PCL printing with
Windows 2000/XP
To set up the EX7750 as a PostScript or PCL printer, you must install the PostScript or
PCL printer driver for Windows 2000/XP and the corresponding printer description
files. You must also configure the print connection between the computer and the
EX7750. If you are printing over a network, you must configure a network connection.
N
OTE
:
The procedures for configuring the options for the PostScript and PCL printer
drivers are similar. The following illustrations show the PostScript driver. Differences
are noted.
Chapter 1:
Installing
User Software
on a Windows
Computer