Windows 2000/XP Network
Phaser® 8200 Color Printer
22
Other methods of installation
Your printer can also be installed on a Windows 2000/XP network using one of these methods:
■
Microsoft TCP/IP protocol
■
AppleTalk protocol
The following methods can also be used to install or configure your printer:
■
The CentreWare DP program on your
Advanced Network Management Tools CD-ROM
can
also be used to monitor and configure the printer.
■
If your printer is connected to a Windows 2000/XP network with the TCP/IP protocol enabled,
you can use a web browser to monitor and configure your printer through CentreWare IS.
■
For installing or managing multiple printers on a Windows 2000/XP network with TCP/IP
protocol enabled, you can use the Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the
Xerox CentreWare MC User Guide
on the
Advanced Network Management Tools CD-ROM
.
The above methods are not discussed in this section. For more information concerning CentreWare IS,
CentreWare DP, or CentreWare MC, see “Printer Management” on page 5.
Quick install steps (Microsoft TCP/IP protocol)
Note
For Windows XP, switch to
Classic Look
using the Taskbar and Start Menu Properties
dialog box. Otherwise, Windows XP procedures do not match the steps below.
1.
At the Desktop, right-mouse-click the
My Network Places
icon and select
Properties
.
2.
Right-mouse-click the
Local Area Connection
icon inside the
Network and Dial-up
Connections
window. Select
Properties
.
3.
Select the
General
tab and verify that
Internet Protocol (TCP/IP)
is loaded.
4.
If the TCP/IP software is not present, install it using the documentation provided by Microsoft,
and then return to this document.
5.
Open the
Control Panel
and double-click the
Printers
icon.
6.
For Windows 2000, double-click
Add Printer
; the
Add Printer Wizard
starts.
For Windows XP, Select the
Printer Tasks
menu and click
Add a Printer
.
7.
Click
Next>
.
8.
Click the
Local Printer
radio button.
9.
Click
Next>
.
10.
Click the
Create a New Port
radio button.
11.
Select
Standard TCP/IP Port
from the
New Port Type
pull-down menu.
12.
Click
Next>.
13.
The wizard now starts the TCP/IP port wizard, click
Next>
.
