![background image](http://html2.mh-extra.com/html/xerox/phaser-8200/phaser-8200_networking-setup-manual_3684143009.webp)
IP Address
Phaser® 8200 Color Printer
4
DNS setup using CentreWare Internet Services
After setting the printer’s IP address, you can set up the printer for DNS using CentreWare IS.
1.
Connect to the printer via CentreWare IS by entering your printer’s IP address into your browser.
2.
On the right side of the main CentreWare IS page, click
Properties
.
3.
In the
Protocols
group, click
TCP/IP
.
4.
Under
DNS Settings
, select
ON
for
Domain Name Service Resolver
.
5.
Enter the following information:
■
Primary Name Server IP Address (required)
■
Second Name Server IP Address (optional)
6.
When you are finished entering the settings, click
Save Changes
at the bottom of the screen.
Dynamic Domain Name Service (DDNS)
This printer supports Dynamic DNS through DHCP. You must have DHCP enabled for DDNS to
function. To enable DHCP:
1.
Connect to the printer via CentreWare IS by entering your printer’s IP address into your browser.
2.
On the right side of the printer’s main CentreWare IS page, click
Properties
.
3.
On the left side under
Protocols
, click
TCP/IP
.
4.
Set the BOOTP/DHCP option to
ON
.
To enable DDNS, enter the following DDNS/WINS settings information:
■
DDNS - Set to
ON.
■
Release Host Name - Set to
NO.
■
DDNS/WINS Name - Use the default name provided by Xerox or enter another name.
■
Primary Name Server IP Address (optional)
■
Second Name Server IP Address (optional)
5.
When you are finished entering the settings, click
Save Changes
at the bottom of the screen.