Xerox Phaser 7100, Руководство пользователя

Страница: 35 / 140

Installation and Setup
Phaser 7100 Color Printer 35
User Guide
1. Insert the Software and Documentation disc into your computer.
2. Double-click the disc icon on your desktop to see the .dmg file for your printer.
3. Open the .dmg file, and navigate to the appropriate installer file for your operating system.
4. Open the installer file.
5. Click Continue to acknowledge the warning and introductory messages.
6. Click Continue and accept the license agreement.
7. To accept the current installation location, click Install , or select another location for the installation
files, then click
Install
.
8. Enter your password, then click OK .
9. Select your printer in the list of discovered printers, then click
Continue
.
10. If your printer does not appear in the list of discovered printers:
a.
Click the Network Printer Icon .
b. Type the IP address of your printer, then click Continue .
c. Select your printer in the list of discovered printers, then click
Continue
.
11. To accept the print queue message, click OK .
12. Select or clear the Set Printer as Default and Print a Test Page check boxes.
13. Click
Continue
, then click
Close
.
Note: The printer is added automatically to the printer queue.
To verify that the print driver recognizes the installed options:
1.
From the Apple menu, click System Preferences > Print & Fax or Print & Scan .
2. Select the printer in the list, then click
Options and Supplies
.
3. Click
Driver
, then confirm that your printer is selected.
4. Confirm that all of the options installed on the printer appear correct.
5. If you change settings, click Apply Changes , close the window, and quit System Preferences.
Installing Drivers and Utilities for UNIX and Linux
Xerox
®
Services for UNIX Systems is a two part installation process. It requires the installation of a
Xerox
®
Services for UNIX Systems code package and a printer support package. The Xerox
®
Services for
UNIX Systems code package must be installed before installing the printer support package.
Note: You must have root or superuser privileges to perform the UNIX print driver installation on
your computer.
1. At the printer, do the following:
a.
Verify that both the TCP/IP protocol and the proper connector are enabled.
b. On the printer control panel, do one of the following for the IP address:
• Allow the printer to set up a DHCP address.
• Enter the IP address manually.