Xerox Phaser 6360 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 564

Xerox Phaser 6360 Скачать руководство пользователя страница 82

2-38

Phaser 6300/6350/6360 Color Laser Printer Service Manual

Theory of Operation

Tray 1 (MPT)

Note

Envelope Feed Rollers have been added to the Tray 1 (MPT) Shaft for the
6360 model. These rollers are clipped to the shaft and held in place by
moulded pins that engage holes in the shaft.

■

Feed Roller

When the Tray 1 (MPT) Feed Solenoid energizes, the Gear MPT and the
Idler Gear are engaged by the force of the solenoid spring. The Feed
Roller rotates from the drive of the Main Drive Assembly and feeds paper
from Tray 1. After rotating one turn, the Gear MPT and the Idler Gear are
disengaged, the Main Drive Assembly and Feed Roller stop, allowing only
one sheet of paper to be fed through at a time.

■

Envelope Feed Rollers

These rollers, present on 6360 models, assist in transporting envelopes
or other custom media sizes through Tray 1 (MPT).

■

Tray 1 (MPT) No Paper Sensor

Detects whether print media is present.

■

Tray 1 (MPT) Feed Solenoid

Controls the operation (rotation/stop) of the Tray 1 (MPT) Feed Roller.

■

Size Guides

Indicates the paper width, maximum capacity, and holds the paper in
proper alignment for feeding.

No Paper Sensor

Envelope Rollers

Feed Solenoid

Gear MPT

s6360-350

Tray 1 (MPT)

Feed Roller

«
...
80
81
82
83
84
...
»

Содержание Phaser 6360





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов