Xerox Phaser 6360, Руководство по обслуживанию

Страница: 181 / 564

Phaser 6300/6350/6360 Color Laser Printer Service Manual 3-81
Error Messages and Codes
Environmental Sensor Failure
An error was detected in the Environmental Sensor circuitry.
Applicable Status Code:
Code 102 : Environmental Sensor Error
6 Check all pins on the RFID Harness
PL7.2.17 for continuity.
1. Disconnect P/J3411 and P/J34.
2. Check continuity between P3411
<=> J34.
Replace the
Engine Control
Board
(page 8-106). Replace the RFID
Harness.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack References
■
Temp/Humidity Sensor, PL9.1.20
■
TMP Harness, PL10.1.4
■
Print Engine Map 4 - P/J Locator (page 10-8)
■
Print Engine Fuser Wiring (page 10-22)
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1
Test the Temperature/Humidity
Sensor.
Run the Service Diagnostics
Temperature/Humidity Sensor test.
Does the sensor function correctly? Go to Step 2. Replace the
Temp/Hum
Sensor
(page 8-110).
2
Check the Humidity signal.
Disconnect P/J231.
Is the voltage across P/J231-2 <=>
P/J231-3 less than +3 V and above
+0.5 V.
Go to Step 4. Go to Step 3.
3
Check the Temperature signal.
Disconnect P/J231.
Is the voltage across P/J231-4 <=>
P/J231-3 greater than +2.5 V?
Go to Step 4. Replace the
Engine Control
Board
(page 8-106).
4
Check for +5 V to the Temperature/
Humidity Sensor.
Disconnect P/J231.
Is there +5 V across P/J231-1 <=>
P/J231-3?
Replace the
Temp/Hum
Sensor
(page 8-110). Replace the
Engine Control
Board
(page 8-106).
Troubleshooting Procedure Table (Continued)
Step Actions and Questions Yes No