Xerox Phaser 6360, Руководство по обслуживанию, Страница: 505 / 564

Phaser 6300/6350/6360 Service Manual 10-13
Wiring Diagrams
Wiring Diagrams
Notations Used in Wiring Diagrams
The following describes the legend used in the wiring diagrams shown on the
following pages.
Symbol Description
Denotes a plug.
Denotes a jack.
Denotes Pin yy and Jack yy of the connector Pxx
and Jxx.
Denotes a Jumper Point (JPxxx/xxx). Each end of
the Jumper connection has a numeric designation.
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in
Parts List.
Denotes functional parts attached with functional
parts name.
Denotes the control and its outline in PWB.
Denotes a connection between parts with
harnesses or wires, attached with signal name/
contents.
Denotes the function, and logic value of the signal
to operate the function (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes the function, and logic value of the signal
when the function operated (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes a connection between wires.
P/J
XX
YY
JPxxx
Fuser
PL X.Y.Z
Heater
Control
DEVE_A
CLUTCH ON(L)+24VDC
EXIT SENSED(L)+3.3VDC