manualshive.com logo in svg

Xerox Phaser 6360, Руководство по обслуживанию, Страница: 318 / 564

Поделиться
Скачать
Xerox Phaser 6360 Скачать руководство пользователя страница 318

8-42

Phaser 6300/6350/6360 Color Laser Printer Service Manual

Service Parts Disassembly

Tray 1 (MPT)

Tray 1 (MPT) (PL1.1.23)

Note

Tray 1 (MPT) has been updated for use on all models. When replacing the 
Tray 1 (MPT), use P/N 802K74593. Do not use P/N 116-1973-00.

1.

Remove the Left Front Cover (page 8-19).

2.

Spread the right and left slots of the Tray 1 (MPT) Cover outward, pull out 

the left and right bosses to release Tray 1 (MPT) from the cover.

3.

Open Door B.

4.

Release the left side boss of Tray 1 (MPT) by rotating the Left Tray Holder 

clockwise to remove it. 

Note

The right side bushing is not captive. Note the Bearing’s orientation as 
you remove it.

5.

Move Tray 1 (MPT) to the right to release the left boss from the frame and 
pull the right boss and bushing from the right side to remove the tray.

 

Replacement Note

Rotate the Tray Holder beyond the stop to lock it in place.

s6360-133

Содержание Phaser 6360





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов