Protocol Control
System Administrator Guide
3-6
Protocol Control
This section includes:
■
HTTP
on page 3-6
■
TCP/IP
on page 3-6
■
Port 9100
on page 3-7
■
LPR
on page 3-7
■
IPP
on page 3-8
■
SNMP
on page 3-8
■
Email Server
on page 3-9
■
MaiLinX Remote Printing
on page 3-10
■
MaiLinX Alerts
on page 3-11
See also:
Discovery Protocols
on page 2-5
All network protocols, including network printing, printing services, printer discovery, and
management protocols can be enabled or disabled on the printer. If a protocol is enabled, you
can set configuration parameters.
Note:
To secure protocols, disable any protocols you are not using. This prevents
unauthorized access through applications that use these protocols. For example, if you want to
use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical
Support at
www.xerox/office/support
.
See also:
About HTTP, HTTPS, and SSL/TLS
on page 4-3
TCP/IP
To change TCP/IP settings:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left sidebar.
5.
Select
TCP/IP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
In the
BOOTP/DHCP
box, select one of the following:
■
On
: The printer issues BOOTP and DHCP requests on startup.
■
Off
: The printer does not issue BOOTP or DHCP requests on startup.
