Print Quality
Phaser® 6180MFP Multifunction Printer
10-25
Color Registration
Color registration can be adjusted by the printer automatically, or you can manually adjust it.
Color registration should be adjusted any time the printer is moved.
Automatic Color Registration Adjustment
Use the following procedure to perform automatic color registration adjustment.
Note:
An automatic color registration adjustment is performed every time a new print
cartridge is installed.
1.
Press the
System
button to display the
Setup
screen.
2.
Press the
Up Arrow
or
Down Arrow
button until
Admin Menu
appears, and then press
the
OK
button.
3.
Press the
Up Arrow
or
Down Arrow
button until
Maintenance
appears, and then press
the
OK
button.
4.
Press the
Up Arrow
or
Down Arrow
button until
Adjust Color Regi
appears, and then
press the
OK
button.
5.
Press the
Up Arrow
or
Down Arrow
button until
Auto Correct
appears, and then press
the
OK
button.
6.
Select
Yes
, and then press the
OK
button.
Moiré pattern
(undesirable pattern in
the halftone) in
Standard mode copies
Standard Mode
Enhanced Mode
The output quality mode is set to Standard.
Change the output quality mode to Enhanced.
Note:
Enhanced mode copies may take a couple of seconds longer to
make.
For information on changing the output quality mode for a single job, see
Output Quality
on page 6-12. For instructions on changing the default
output quality mode setting, see
Selecting the Default Copy Settings
on
page 6-5.
Symptom
Reason/Action
