Xerox PHASER 6121MFP, Руководство по обслуживанию

Страница: 519 / 532

Phaser 6121MFP Service Manual A-13
Reference
Fax Send Options Setup Menu
Fax Receive Options Setup Menu
Menu Item Description
Lighten/Darken Specifies the density level of the image or text.
Quality Default Specifies the resolution of the scanned image being
faxed:
■
Standard/Text – For documents containing large or
easy-to-read text.
■
Fine/Text – For documents containing text that
needs higher resolution, such as small print or
handwritten text.
■
SuperFine/Text – For text that needs the highest
resolution, or detailed illustrations (not photos).
■
Standard/Photo – For documents containing
standard photos.
■
Fine/Photo – For photos needing higher resolution.
■
Super Fine/Photo – For photos needing the highest
resolution.
Send Mode
■
Scan then Dial
(default) – The printer scans the
documents and then transmits the fax.
■
Dial then Scan – The printer dials and connects to
the destination before scanning the documents to
fax.
Header
■
On
– Sender information is included in the fax
transmission: date and time, transmitter’s name
and fax number, session number, page number,
and total page number.
■
Off
– Sender transmission information is not
printed.
Reset to Default? When selected, resets all Send options to their
original factory defaults.
Menu Item Description
Memory Receive
■
On – Faxed data is stored in memory instead of
being printed when received.
■
Off (default) – Faxes are printed at the time they
are received.
Number of Rings
Specifies the number of rings (from 1 to 16) allowed
before the printer connects to an incoming fax.
Scale to Fit
Used when the image being received is larger than
the printable area of the paper.
■
On – The information is reduced to fit the page.
■
Off – The information is divided into the number of
pages it takes to print it.
■
Crop
– The information that is outside the
printable area of the page is not included in the fax
printout.