Xerox PHASER 6121MFP, Руководство пользователя

Страница: 157 / 238

Control Panel Menus
Phaser 6121MFP Multifunction Printer
User Guide
157
Receive Print • Memory Receive (default): The fax prints after the entire transmission
has been received. Note that this setting is separate from the Memory
Receive menu item at the beginning of the Receive Option Menu.
• Print Receive : The fax begins printing as soon as the first page has been
received.
Receive Mode • Auto RX (auto receive): The printer always answers an incoming call as
a fax.
• Manual Receive : The line continues to ring until you start the receive
fax function manually.
• DRPD (Distinctive Ring Pattern1, Pattern2, Pattern3, Pattern4): The
printer determines from the ring pattern if the call is a voice phone call
or a fax.
Forward Specifies whether the printer should forward incoming faxes to a specified
destination and whether to print before forwarding.
•
On : Faxes received will be forwarded to the specified fax number or
email address.
• On (Print) : Faxes received will print out and then be forwarded.
• Off : Faxes received will not be forwarded.
Footer • On : Fax reception information is printed at the bottom of the printable
area (footer) of the fax.
• Off : Fax reception information is not printed in the footer.
Select Tray Specifies which paper tray the printer uses for printing faxes. (Selection is
not possible if there is only one tray.)
• Tray 1
• Tray 2 (Option for Phaser 6121MFP/N or /D printer configurations only.)
Reset to Default? When selected, resets the Receive options back to their original factory
defaults.
Menu Item Description