Xerox PHASER 5400, Быстрая установка

Страница: 36 / 40

30
Xerox Phaser 5400 Laser Printer
Dynamic addressing (RARP/BOOTP)
The TCP/IP address is assigned automatically by the Server. Follow
the steps below:
1.
Press
Menu Up
or
Menu Down
until you see:
Menus
Ethernet Menu
2.
Press
Item Up
or
Item Down
until you see:
Ethernet Menu
IP Address Res.
3. Press
Value Up
or
Value Down
until you see:
IP Address Res.
BOOTP/RARP
4.
Press
Enter
.
5. Update the RARP/BOOTP server's /etc/bootptab files with the
printer’s hardware and IP address. In order to communicate with
the printer using the hostname rather than the IP address, update
the /etc/hosts file with the printer’s IP address and hostname (IP
hostname from the configuration sheet).You can also update the
/etc/ethers
file using the printer’s hardware address and
hostname
.
6.
Power off the Printer.
7. Power the printer on and allow time for an IP address to be
assigned by the RARP/BOOTP server (this time may vary
depending on network traffic).
8. Perform the steps contained in the section of this document
entitled Appendix A: Print the Configuration Sheet .
9. Obtain the TCP/IP address from the Configuration Sheet.