Xerox PHASER 5400, Быстрая установка

Страница: 35 / 40

Quick Network Install Guide
29
For Phaser networked printers
Static addressing
The printer is assigned a TCP/IP address by a network administrator
and this address is manually input to the printer. Perform the steps
below:
1. Press Menu Up or Menu Down until you see:
Menu
Ethernet Menu
2. Press Item Up or Item Down until you see:
Ethernet Menu
IP Address Res.
3. Press Value Up or Value Down until you see:
IP Address Res. =
Static *
4.
Press
Enter.
5. Press Item Up or Item Down until you see:
Ethernet Menu
IP Address
6.
Press
Value Up
or
Value Down
until you see:
IP Address =
xxx.xxx.xxx.xxx
7. Use Value Up or Value Down to increment the underlined value
in the IP Address by 1 each time the key is pressed. Holding down
Value Up or Value Down causes continuous scrolling through the
values.
8. Use Item Up or Item Down to scroll left or right respectively
through the positions of the IP Address and repeat Step 4 above
until you have completely selected the IP Address.
9. Press Enter to set the IP Address after you have completed
selecting it.
10. Reset the Printer to have the new settings take effect.