Xerox PHASER 5400, Быстрая установка

Страница: 10 / 40

4
Xerox Phaser 5400 Laser Printer
Windows 95/98/Me Network
Quick install steps
1. Insert your printer’s CD-ROM into your computer’s CD-ROM
drive. If your PC is set to autorun, a CD Navigator Utility should
automatically start. If it does not start, then:
a. Click
Start
and
Run
.
b. In the Run window, type:
<CD drive>:\SETUP32.EXE
.
2.
Select your desired language from the available list.
Printer driver installation
1. Install the printer drivers for your printer. Within CD Navigator,
select Printer Drivers , and then select Install Xerox Phaser 5400
Laser Printer Drivers .
Note
The Xerox TCP/IP Port Monitor has not been installed yet. It
is necessary to temporarily install the printer drivers to an
alternate port. A local port, such as LPT1, is recommended.
2. Run the TCP/IP Port Monitor Setup program located on your
printer’s CD-ROM:
a. Click Start and Run .
b. In the Run window, type: <CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows 9x\<language>\setup.exe
.
3. On the first dialog box, select Install/Upgrade Port Monitor and
click OK .
Port monitor installation
1. The installation process automatically copies the files to the
system directory. When this process is completed, a dialog box
appears that reads: The Xerox TCP/IP Port Monitor was
successfully installed. To add or remove ports, select the ports
tab in your printer properties.
2. Click OK .