Xerox PHASER 5400, Быстрая установка

Страница: 17 / 40

Quick Network Install Guide
11
In the Add Xerox TCP/IP Port window:
a. Under Enter a Port Name , enter a unique name for the port
being added.
b. Under Enter a printer name or IP address , enter the printer’s
host name or IP Address.
c.
Click
Next
.
Note
To locate Xerox printers on your local area network, select
Auto Printer Discovery , and then click Refresh . The Xerox
TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select your desired printer from
the list and click
OK
.
6. After all the port settings have been configured and verified, a
Completing dialog box appears summarizing all of the settings.
You have the opportunity to change any of the settings by clicking
the Back key. Otherwise, click the Finish key to complete the port
setup.
7. Click
OK
to exit from
Printer Properties
. This completes the
installation of the Xerox TCP/IP Port.
Quick install steps (AppleTalk protocol)
1. At the Desktop, right-mouse-click the Network Neighborhood
icon and select
Properties .
2. Click the
Protocol
s
tab and verify that the
AppleTalk
protocol has
been loaded.
3.
If the AppleTalk software is not present, install it using the
documentation provided by Microsoft, and then return to this
document.
4. Open the Control Panel and double-click the Printers icon.
5. Double-click Add Printer ; the Add Printer Wizard starts.
6. Verify that
My Computer
is selected and click
Next>
.
7.
Click
Add Port
.
8. Select the AppleTalk Printing Devices and click New Port .
9. Click Ethernet and select the device.