Xerox PHASER 5400, Быстрая установка

Страница: 22 / 40

16
Xerox Phaser 5400 Laser Printer
Printer driver installation
1. Install the printer drivers for your printer. Within CD Navigator,
select Printer Drivers , and then select Install Xerox Phaser 5400
Laser Printer Drivers
.
Note
The Xerox TCP/IP Port Monitor has not been installed yet. It
is necessary to temporarily install the printer drivers to an
alternate port. A local port, such as LPT1, is recommended.
2. Run the TCP/IP Port Monitor Setup program located on your
printer’s CD-ROM:
a.
Click
Start
and
Run
.
b. In the Run window, type: <CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows 2000\<language>\setup.exe
.
3. In the first dialog box, select Install/Upgrade Port Monitor and
click OK .
Port monitor installation
1. The installation process automatically copies the files to the
system directory. When this process has been completed, a dialog
box appears that reads:
The Xerox TCP/IP Port was successfully
installed. To add or remove ports, select the ports tab in your
printer properties.
2. Click OK .
Adding a port
1. To add a TCP/IP port, open the Printer Properties dialog box for
the printer you would like to attach the new TCP/IP port.
a. Click Start , scroll to Settings , and click Printers .
b. Click your right-mouse button on the printer to which you
want to attach the new TCP/IP port, and select Properties .
2. Select the Ports tab, and click the Add Ports button.
3. From the list of available printer port monitors, select the Xerox
TCP/IP Port , and then click the New Port button.