
Maintenance
92
Xerox
®
Phaser
®
3610 Black and White Printer
User Guide
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1.
At the printer control panel, press the
Menu
button.
Note:
To navigate through the menu, use the
Up
or
Down
arrow buttons.
2.
Navigate to
Admin Settings
, then press
OK
.
3.
Navigate to
Service Tools
, then press
OK
.
4.
Select
Adjust Fuser
, then press
OK
.
5.
To select the paper type for the adjustment, press the arrow buttons, then press
OK
.
6.
To increase or decrease the amount of offset, press the arrow buttons, then press
OK
.
7.
Repeat this procedure for each paper type you need to adjust.
8.
To return to Service Tools, press the
Back
arrow button, or to return to the main menu, press the
Menu
button.
Adjusting the Density
The Density Adjustment feature controls how much toner is used to print. Adjust the density for lighter
toner use for saving toner or heavier for making prints bolder. A positive adjustment makes the prints
darker, while a negative adjustment makes the prints lighter.You can also adjust it to compensate for
different paper types and thicknesses.
To adjust the density:
1.
At the printer control panel, press the
Menu
button.
Note:
To navigate through the menu, use the
Up
or
Down
arrow buttons.
2.
Navigate to
Admin Settings
, then press
OK
.
3.
Navigate to
Service Tools
, then press
OK
.
4.
Select
Adjust Density
, then press
OK
.
5.
To increase or decrease the amount of offset, use the arrow buttons, then press
OK
.
6.
To return to the Ready screen, press the
Menu
button.