
Installation and Setup
Xerox
®
Phaser
®
3610 Black and White Printer
41
User Guide
4.
Open the installer file.
5.
To acknowledge the warning and introductory messages, click
Continue
. Click
Continue
again.
6.
To accept the license agreement, click
Continue
, then click
Agree
.
7.
To accept the current installation location, click
Install
, or select another location for the installation
files, then click
Install
.
8.
Enter your password, then click
OK
.
9.
Select your printer in the list of discovered printers, then click
Continue
.
10.
If your printer does not appear in the list of discovered printers:
a.
Click the
Network Printer Icon
.
b.
Type the IP address of your printer, then click
Continue
.
c.
Select your printer in the list of discovered printers, then click
Continue
.
11.
To accept the print queue message, click
OK
.
12.
To accept the installation success message, click
Close
.
Note:
The printer is automatically added to the printer queue in Macintosh OS X version 10.4 and
later.
To verify that the print driver recognizes the installed options:
1.
From the Apple menu, click
System Preferences
>
Print and Scan
.
2.
Select the printer in the list, then click
Options and Supplies
.
3.
Click
Driver
, then confirm that your printer is selected.
4.
Confirm that all of the options installed on the printer appear correct.
5.
If you change settings, click
OK
, close the window, then exit System Preferences.
Installing Drivers and Utilities for UNIX and Linux
Xerox
®
Services for UNIX Systems is a two part installation process. It requires the installation of a
Xerox
®
Services for UNIX Systems code package and a printer support package. The Xerox
®
Services for
UNIX Systems code package must be installed before installing the printer support package.
Note:
You must have root or superuser privileges to perform the UNIX print driver installation on
your computer.
1.
At the printer, do the following:
a.
Verify that both the TCP/IP protocol and the proper connector are enabled.
b.
On the printer control panel, do one of the following for the IP address:
•
Allow the printer to set up a DHCP address.
•
Enter the IP address manually.
c.
Print the Configuration Report and keep it for reference. For details, see
Configuration Report
on page 23.